Skip to main content
True Trade Path

Dallas, TX

Carpenters in Dallas

Framing, finish carpentry, decks, stairs and structural repair contractors. Local labor in Dallas runs about 3 percent below the national median, which is the adjustment to apply before you use any national price.

Metro population
1,302,868
Labor cost index
0.97×
State
Texas

Emergency and utility numbers in Texas

For gas odor, downed power lines, or flooding, call 911 or your utility emergency line first — not a contractor. After the immediate hazard is controlled, hire licensed pros for permanent repair.

  • 911 — fire, medical, immediate life safety
  • Gas odor — leave the building, do not switch lights, call your gas utility emergency number from outside
  • Power outage / lines down — utility emergency line; stay away from downed conductors

Trade owners in Dallas

Claiming your profile is free — correct licence, service area, and contact. No lead fees and no paid placement.

Claim your business

Carpenters listed in Dallas

No listings here yet

We publish a listing only where the organization asked to be listed, or where every field came from a public licence register. Neither has happened for carpenters in Dallas yet, so there is nothing to show — rather than a page of names scraped from somewhere and presented as vetted.

The costs, licensing and verification steps below apply regardless. If you run a business here, listing is free and always will be.

What the work costs here

National ranges adjusted by the Dallas labor index. Materials move far less by region than labor does, so treat these as directional — the range narrows once someone has actually seen the job.

Carpenter median pay here
$54,500
National median $56,350
Labor cost vs. national
-3%
Applied to the estimates below
Metro population
1,302,868
Texas
Typical job costs in Dallas, adjusted from national ranges
JobNational typicalDallas typicalRange here
Foundation Repair$9,000$8,700$1,900–$39,000
Window Replacement$900$875$425–$2,400
Siding Replacement$15,000$14,500$7,800–$34,000
Fence Installation$3,500$3,400$1,500–$7,800
Deck Building$12,000$11,500$4,900–$24,500
Tree Removal$750$725$200–$2,400
Kitchen Remodel$35,000$34,000$14,500–$77,500
Bathroom Remodel$15,000$14,500$5,800–$39,000
Flooring Installation$5,000$4,900$1,900–$11,500
Drywall Repair$500$475$200–$1,500
Interior Painting$3,500$3,400$1,500–$7,800
Insulation Installation$3,000$2,900$1,500–$6,800
Garage Door Replacement$1,500$1,500$775–$3,400
Pressure Washing$350$350$200–$1,200
Stucco Repair$1,400$1,400$475–$6,300
Masonry Repointing$2,200$2,100$775–$8,700
Deck Repair$1,600$1,600$475–$6,300
Deck Staining$950$925$400–$3,100
Fence Repair$650$625$200–$3,100
Pergola Build$5,000$4,900$2,400–$14,500
Exterior Painting$4,800$4,700$2,400–$13,500
Sod Installation$2,000$1,900$875–$6,300
Landscape Grading$2,800$2,700$1,200–$10,500
Tree Trimming$650$625$250–$3,100
Stump Grinding$325$325$150–$925
Drywall Installation$2,200$2,100$875–$8,200
Popcorn Ceiling Removal$1,400$1,400$675–$4,700
Trim Installation$1,600$1,600$575–$6,300
Interior Door Replacement$325$325$175–$825
Exterior Door Replacement$1,400$1,400$575–$4,100
Texture Repair$450$425$200–$1,600
Staircase Repair$2,200$2,100$875–$8,700
Closet Build-Out$2,800$2,700$1,200–$10,500
Cabinet Installation$5,000$4,900$2,100–$15,500
Cabinet Refacing$8,000$7,800$4,400–$18,500
Countertop Installation$3,800$3,700$2,100–$12,000
Backsplash Installation$1,700$1,600$875–$4,100
Appliance Installation$300$300$150–$825
Tile Floor Installation$3,800$3,700$1,600–$12,500
Hardwood Refinishing$3,200$3,100$1,600–$8,200
Carpet Installation$2,000$1,900$875–$6,300
LVP Installation$3,000$2,900$1,600–$8,700
Attic Insulation$2,800$2,700$1,600–$7,300
Basement Egress Window$5,500$5,300$3,400–$12,500
Mold Remediation$4,000$3,900$1,600–$15,500
Fire Damage Restoration$14,000$13,500$5,800–$50,500
Asbestos Abatement$7,000$6,800$2,400–$31,000
Lead Paint Remediation$18,000$17,500$8,700–$50,500

How these numbers are derived

National ranges are multiplied by a 0.97× labor index for Dallas. The index is an approximation for planning, not a wage survey, and it applies to labor rather than to materials. Use it to sanity-check a quote, not to argue one down to the dollar.

Permits and code in Dallas

Checked against the issuing authority on 2026-10-06. Fees and thresholds change — the link below is the authority, this page is not.

City of Dallas Department of Development Services

Online via Dallas Now (Plus) Portal or in person at 320 E. Jefferson Blvd. Licensed trade contractors must register with the city prior to permit application.

Permit office website(214) 948-4480

What needs a permit here

  • Electrical panel upgrades, main service disconnect replacements, or EV charger branch circuits
  • Gas or electric water heater replacement and gas supply piping alterations
  • Complete HVAC system replacement, condenser swap, or furnace gas valve replacement
  • Roof replacement when replacing structural decking or re-roofing over 100 sq ft
  • Foundation repair, piers, slab lifting, or structural wall framing repairs
  • Lawn sprinkler backflow preventer installations or main sewer line replacements
Published permit fees for Dallas
PermitPublished feeNotes
Minimum Residential Building Permit Fee$85.00 base + $20.00 admin feeStandard baseline fee for minor alterations and single-trade residential scope.
Electrical Service / Panel Replacement Permit$90.00 - $130.00Calculated based on circuit count and service disconnect amperage rating.
Water Heater Plumbing Permit Fee$65.00 - $85.00Covers temperature pressure relief valve piping, expansion tank, and gas vent inspection.
Mechanical / HVAC System Permit$75.00 base + $15.00 per unitCovers equipment changeout, refrigerant line pressure check, and duct leakage verification.

Local amendments worth knowing

Cities adopt the model codes then amend them. The amendments are what catch people out, because a national guide will not mention them.

  • 2021 Dallas Building Code (IRC Amendments)

    Requires engineered foundation plans signed and sealed by a Texas PE for all residential additions and slab repairs on expansive soils.

    Read the amendment

  • Dallas Electrical Code (2020 NEC Amendments)

    Mandates tamper-resistant and AFCI protection across all residential living spaces and exterior emergency disconnects.

    Read the amendment

  • Dallas Plumbing Code (2021 UPC Amendments)

    Requires mandatory thermal expansion tanks on all closed-loop water heater installations and annual testing of backflow prevention assemblies.

    Read the amendment

Verify a licence

  • Texas Department of Licensing and Regulation (TDLR) — Electrical

    Master Electricians, Journeymen, Electrical Contractors

    Public licence lookup

  • Texas State Board of Plumbing Examiners (TSBPE)

    Master & Journeyman Plumbers, Plumbing Contractors

    Public licence lookup

  • TDLR Air Conditioning and Refrigeration (ACR)

    Class A & B Environmental & Commercial Air Conditioning Contractors

    Public licence lookup

  • Texas Board of Professional Engineers and Land Surveyors

    PE sign-off for foundation repair plans and structural retaining walls

    Public licence lookup

Conditions that change the job here

  • Highly expansive clay soils ('Eagle Ford' and 'Austin Chalk' formations) cause frequent slab foundation movement, requiring specialized pier systems and flexible plumbing connections.
  • Severe spring severe thunderstorm and hail storms inflict high annual roof damage, driving frequent complete re-roofing permits and impact-resistant shingle upgrades.
  • Hot, humid summer weather requires high-efficiency cooling (minimum 14.3 SEER2) and robust attic insulation to control cooling costs.
  • Winter freeze events (e.g., Winter Storm Uri legacy) emphasize freeze protection for exposed exterior piping, backflow preventers, and attic water lines.
  • Hard municipal water supply accelerates mineral sediment buildup in tank water heaters, reducing unit operational lifespan.

Local context for Dallas, TX

Permit rules, fees, and housing-stock conditions change by city even within the same state. These facts come from the researched metro profile — not from a template with the city name swapped in.

Permit office

City of Dallas Department of Development Services · Filing information · (214) 948-4480

Common permit triggers here

  • Electrical panel upgrades, main service disconnect replacements, or EV charger branch circuits
  • Gas or electric water heater replacement and gas supply piping alterations
  • Complete HVAC system replacement, condenser swap, or furnace gas valve replacement
  • Roof replacement when replacing structural decking or re-roofing over 100 sq ft
  • Foundation repair, piers, slab lifting, or structural wall framing repairs
  • Lawn sprinkler backflow preventer installations or main sewer line replacements

Local conditions that change the work

  • Highly expansive clay soils ('Eagle Ford' and 'Austin Chalk' formations) cause frequent slab foundation movement, requiring specialized pier systems and flexible plumbing connections.
  • Severe spring severe thunderstorm and hail storms inflict high annual roof damage, driving frequent complete re-roofing permits and impact-resistant shingle upgrades.
  • Hot, humid summer weather requires high-efficiency cooling (minimum 14.3 SEER2) and robust attic insulation to control cooling costs.
  • Winter freeze events (e.g., Winter Storm Uri legacy) emphasize freeze protection for exposed exterior piping, backflow preventers, and attic water lines.
  • Hard municipal water supply accelerates mineral sediment buildup in tank water heaters, reducing unit operational lifespan.
Source: Metro profile research · checked 2026-10-06

Verify before you hire in Texas

  1. Check the licence with the Texas board

    Generally unlicensed as a trade. A general contractor license is required in most states to contract work directly. Search the number in the state's public lookup, confirm it is active, and confirm the classification covers your job rather than something adjacent to it.

  2. Have the insurer send the certificate

    Ask for general liability and workers' compensation to be sent to you directly by the insurance agent. A PDF forwarded by the contractor proves the document existed once, not that the policy is current.

  3. Get the scope in writing, with exclusions

    What is included matters less than what is excluded. Permits, disposal, patching, and code upgrades triggered by the work are the four line items that most often turn into change orders.

  4. Confirm who pulls the permit

    Permit thresholds are municipal in Texas. The licence holder should pull it. If you are asked to pull it as a homeowner on licensed work, you are absorbing their liability.

  5. Never pay the full amount up front

    A deposit for materials on a large job is normal. Paying in full before work begins is not, and several states cap what a contractor may take as a deposit.

Work out the problem before you call

Questions about hiring in Dallas

How much do carpenters charge in Dallas?
Local labor in Dallas runs about 3 percent below the national median, so a national estimate should be adjusted accordingly. Against a national median of $56,350 a year, carpenters in this metro earn closer to $54,500, and service rates track that difference.
Do I need a licensed professional in Texas?
Generally unlicensed as a trade. A general contractor license is required in most states to contract work directly. Confirm the licence number with the Texas board before work begins, and confirm the classification covers your specific job.
Is a permit required in Dallas?
Permit thresholds are set municipally and differ even between neighbouring cities in Texas. As a rule, anything altering electrical service, gas piping, drain-waste-vent, or structure requires one. The contractor holding the licence should pull it — if they ask you to pull it as a homeowner on work like that, treat it as a warning.
How do I verify a contractor's licence?
The Texas licensing board publishes a free public lookup. Search the licence number, confirm it is active rather than expired or suspended, and confirm the name on the licence matches the business on your quote. Then have the certificate of insurance sent to you directly by the insurer.

Other trades in Dallas