Cabinet Refacing Cost

National cost range

Low end

$4,500

Simple access, like-for-like

Typical

$8,000

What most jobs come in at

High end

$19,000

Upgrades, difficult access, code work

What you are actually paying for

Find the row that matches your situation. Quotes that differ wildly from each other usually differ in scope, not in price.

What moves the price

In descending order of impact. These are also the questions worth asking a contractor whose quote sits outside the range above.

1. 1

   Cabinet and counter material

   Stock boxes versus semi-custom and stone counters dominate the material stack.

2. 2

   Layout changes

   Moving sink, range, or dishwasher lines adds plumbing and electrical rough-in.

3. 3

   Appliance tier

   Panel amperage, gas lines, and vent paths must match the appliance spec.

4. 4

   Backsplash complexity

   Subway tile is faster than mosaic, outlets, and niche cuts around windows.

5. 5

   Demo and disposal

   Haul-away, countertop breaking, and patch work are frequently excluded in teaser prices.

Direct answer

Cabinet Refacing in 2026 typically costs $4,500 to $19,000 per kitchen nationwide, with planning figures near $8,000. The spread is usually access, substrate condition, and whether permits or drying days are required—not a single material choice.

What each price band actually buys

Low end

Covers straightforward access, standard materials, and a single mobilization without major code or restoration add-ons.

Typical

Mid-grade materials, normal scheduling, and the scope described in the typical scenario row.

High end

Difficult access, premium finishes, structural repairs, regulated abatement, or emergency mobilization.

Labor vs materials

Typical split for this job nationally: roughly 55% labor and 45% materials. Crew size is usually 1–3 tradespeople, across one to three site visits depending on inspection or drying.

What this price usually does not include

• Permit fees when charged separately by the authority
• Temporary relocation or storage unless line-itemed
• Unrelated room finishing beyond the work area
• Major structural engineering unless scoped
• Landscaping repair outside the disturbed work zone
• Extended manufacturer warranties sold at retail

Hidden costs that show up on real jobs

Regional variation

Carpentry and finish labor drives regional spread: coastal and Northeast metros often run 20–35% above national medians for the same scope, while competitive Sun Belt markets may sit closer to median. Compare localized pages at `/home/cost/cabinet-refacing/[metro]` when published, and verify licence requirements at `/licensing/[state]`.

Code upgrades this job can trigger

• Permit and inspection when jurisdiction requires it for this scope
• Updated flashing, drainage, or safety devices when code triggers
• Engineered design when structural limits are exceeded

Repair vs replace

Repair makes sense when the surrounding assembly is sound and failure is localized. Replacement or full-system work is appropriate when hidden damage, repeated callbacks, or code non-compliance affect safety or resale. Compare repair quotes to a full-scope bid with warranty before authorizing band-aid work on components past typical service life.

Timeline and visits

Most jobs schedule within one to two weeks; weather, drying, and material lead times can extend the calendar. Ask for a written day-by-day plan when occupancy or insurance timelines matter.

Quote checklist — line items a fair bid should show

1. Measured quantity (square feet, linear feet, or unit count)
2. Material brands and grades
3. Prep, demo, and disposal line items
4. Permit and inspection fees if applicable
5. Warranty on labor and materials
6. Payment schedule and change-order rates
7. Cleanup and landscape protection

Questions to ask before you sign

• What exact measurements did you use for this price?
• What is excluded if hidden damage appears?
• Will you pull permits and meet inspectors on this scope?
• How do you protect occupied areas during work?
• What warranty applies if the same issue returns?
• Is haul-away and dump fees included?

Quote red flags for this job

• Single lump sum with no quantities or materials list
• Refusal to permit work that clearly requires inspection
• Cash-only bid far below peers with no exclusion list
• No plan for weather, drying, or occupancy during work
• Deposit over 50% before materials arrive
• Pressure to skip containment or testing on loss jobs

Payment schedule norms

Smaller service jobs: due on completion. Larger projects: 25–33% deposit, progress payments at defined milestones, balance at walkthrough.

Part of a larger project?

A complete guide to planning, budgeting, sequencing, and managing a full kitchen remodel, from cabinet ordering to final inspection.

Can you do it yourself?

When this cannot wait

• Visible damage or failure affecting daily use
• Safety or weather exposure risk if delayed
• Insurance, sale, or inspection deadline

Common questions