Dallas, TX
Electricians in Dallas
Licensed electrical contractors for panel work, wiring, troubleshooting and code corrections. Local labor in Dallas runs about 3 percent below the national median, which is the adjustment to apply before you use any national price.
- Metro population
- 1,302,868
- Labor cost index
- 0.97×
- State
- Texas
Emergency and utility numbers in Texas
For gas odor, downed power lines, or flooding, call 911 or your utility emergency line first — not a contractor. After the immediate hazard is controlled, hire licensed pros for permanent repair.
- 911 — fire, medical, immediate life safety
- Gas odor — leave the building, do not switch lights, call your gas utility emergency number from outside
- Power outage / lines down — utility emergency line; stay away from downed conductors
Trade owners in Dallas
Claiming your profile is free — correct licence, service area, and contact. No lead fees and no paid placement.
Claim your businessElectricians listed in Dallas
No listings here yet
We publish a listing only where the organization asked to be listed, or where every field came from a public licence register. Neither has happened for electricians in Dallas yet, so there is nothing to show — rather than a page of names scraped from somewhere and presented as vetted.
The costs, licensing and verification steps below apply regardless. If you run a business here, listing is free and always will be.
What the work costs here
National ranges adjusted by the Dallas labor index. Materials move far less by region than labor does, so treat these as directional — the range narrows once someone has actually seen the job.
- Electrician median pay here
- $59,500
- National median $61,590
- Labor cost vs. national
- -3%
- Applied to the estimates below
- Metro population
- 1,302,868
- Texas
How these numbers are derived
Permits and code in Dallas
Checked against the issuing authority on 2026-10-06. Fees and thresholds change — the link below is the authority, this page is not.
City of Dallas Department of Development Services
Online via Dallas Now (Plus) Portal or in person at 320 E. Jefferson Blvd. Licensed trade contractors must register with the city prior to permit application.
What needs a permit here
- Electrical panel upgrades, main service disconnect replacements, or EV charger branch circuits
- Gas or electric water heater replacement and gas supply piping alterations
- Complete HVAC system replacement, condenser swap, or furnace gas valve replacement
- Roof replacement when replacing structural decking or re-roofing over 100 sq ft
- Foundation repair, piers, slab lifting, or structural wall framing repairs
- Lawn sprinkler backflow preventer installations or main sewer line replacements
| Permit | Published fee | Notes |
|---|---|---|
| Minimum Residential Building Permit Fee | $85.00 base + $20.00 admin fee | Standard baseline fee for minor alterations and single-trade residential scope. |
| Electrical Service / Panel Replacement Permit | $90.00 - $130.00 | Calculated based on circuit count and service disconnect amperage rating. |
| Water Heater Plumbing Permit Fee | $65.00 - $85.00 | Covers temperature pressure relief valve piping, expansion tank, and gas vent inspection. |
| Mechanical / HVAC System Permit | $75.00 base + $15.00 per unit | Covers equipment changeout, refrigerant line pressure check, and duct leakage verification. |
Local amendments worth knowing
Cities adopt the model codes then amend them. The amendments are what catch people out, because a national guide will not mention them.
2021 Dallas Building Code (IRC Amendments)
Requires engineered foundation plans signed and sealed by a Texas PE for all residential additions and slab repairs on expansive soils.
Read the amendmentDallas Electrical Code (2020 NEC Amendments)
Mandates tamper-resistant and AFCI protection across all residential living spaces and exterior emergency disconnects.
Read the amendmentDallas Plumbing Code (2021 UPC Amendments)
Requires mandatory thermal expansion tanks on all closed-loop water heater installations and annual testing of backflow prevention assemblies.
Read the amendment
Verify a licence
Texas Department of Licensing and Regulation (TDLR) — Electrical
Master Electricians, Journeymen, Electrical Contractors
Public licence lookupTexas State Board of Plumbing Examiners (TSBPE)
Master & Journeyman Plumbers, Plumbing Contractors
Public licence lookupTDLR Air Conditioning and Refrigeration (ACR)
Class A & B Environmental & Commercial Air Conditioning Contractors
Public licence lookupTexas Board of Professional Engineers and Land Surveyors
PE sign-off for foundation repair plans and structural retaining walls
Public licence lookup
Conditions that change the job here
- Highly expansive clay soils ('Eagle Ford' and 'Austin Chalk' formations) cause frequent slab foundation movement, requiring specialized pier systems and flexible plumbing connections.
- Severe spring severe thunderstorm and hail storms inflict high annual roof damage, driving frequent complete re-roofing permits and impact-resistant shingle upgrades.
- Hot, humid summer weather requires high-efficiency cooling (minimum 14.3 SEER2) and robust attic insulation to control cooling costs.
- Winter freeze events (e.g., Winter Storm Uri legacy) emphasize freeze protection for exposed exterior piping, backflow preventers, and attic water lines.
- Hard municipal water supply accelerates mineral sediment buildup in tank water heaters, reducing unit operational lifespan.
Local context for Dallas, TX
Permit rules, fees, and housing-stock conditions change by city even within the same state. These facts come from the researched metro profile — not from a template with the city name swapped in.
Permit office
City of Dallas Department of Development Services · Filing information · (214) 948-4480
Common permit triggers here
- Electrical panel upgrades, main service disconnect replacements, or EV charger branch circuits
- Gas or electric water heater replacement and gas supply piping alterations
- Complete HVAC system replacement, condenser swap, or furnace gas valve replacement
- Roof replacement when replacing structural decking or re-roofing over 100 sq ft
- Foundation repair, piers, slab lifting, or structural wall framing repairs
- Lawn sprinkler backflow preventer installations or main sewer line replacements
Local conditions that change the work
- Highly expansive clay soils ('Eagle Ford' and 'Austin Chalk' formations) cause frequent slab foundation movement, requiring specialized pier systems and flexible plumbing connections.
- Severe spring severe thunderstorm and hail storms inflict high annual roof damage, driving frequent complete re-roofing permits and impact-resistant shingle upgrades.
- Hot, humid summer weather requires high-efficiency cooling (minimum 14.3 SEER2) and robust attic insulation to control cooling costs.
- Winter freeze events (e.g., Winter Storm Uri legacy) emphasize freeze protection for exposed exterior piping, backflow preventers, and attic water lines.
- Hard municipal water supply accelerates mineral sediment buildup in tank water heaters, reducing unit operational lifespan.
Verify before you hire in Texas
Check the licence with the Texas board
Journeyman and master licenses are issued by states or municipalities; most require documented hours plus an exam. Search the number in the state's public lookup, confirm it is active, and confirm the classification covers your job rather than something adjacent to it.
Have the insurer send the certificate
Ask for general liability and workers' compensation to be sent to you directly by the insurance agent. A PDF forwarded by the contractor proves the document existed once, not that the policy is current.
Get the scope in writing, with exclusions
What is included matters less than what is excluded. Permits, disposal, patching, and code upgrades triggered by the work are the four line items that most often turn into change orders.
Confirm who pulls the permit
Permit thresholds are municipal in Texas. The licence holder should pull it. If you are asked to pull it as a homeowner on licensed work, you are absorbing their liability.
Never pay the full amount up front
A deposit for materials on a large job is normal. Paying in full before work begins is not, and several states cap what a contractor may take as a deposit.
Work out the problem before you call
- ElectricalBreaker Keeps TrippingUnderstand why a circuit breaker trips repeatedly and which causes are safe to investigate yourself.
- ElectricalOutlet Not WorkingA dead outlet or one that stopped working — check these causes before calling an electrician for a simple fix.
- ElectricalGFCI Won't ResetA GFCI outlet or breaker that will not stay reset — there is a ground fault somewhere on the circuit that must be found.
- ElectricalLights FlickeringLights that flicker or dim — determine whether it is a loose bulb, an overloaded circuit, or a problem at the panel.
- ElectricalBreaker Won't ResetA circuit breaker that trips and will not stay on — the circuit has a fault that must be found before you reset again.
- VentilationBathroom Fan Not VentingA bathroom exhaust fan that runs but does not move air — moisture stays in the room and mold follows within weeks.
- ElectricalHalf of Outlets Not WorkingWhen some outlets work and others do not, look for a tripped GFCI, tripped breaker, or a failed outlet feeding the chain.
- ElectricalBurning Smell From OutletA burning or fishy smell at an outlet means overheating — shut the circuit off until the device is replaced or inspected.
- ElectricalWarm Light SwitchA warm switch is drawing excessive current or has a bad connection — common with dimmers on heavy or incompatible loads.
- ElectricalBuzzing Breaker PanelBuzzing from the panel suggests a loose breaker, failing AFCI/GFCI, or arcing at lugs — treat as urgent.
- ElectricalLights Dim When Appliance RunsVoltage dip when a large load starts usually means shared circuit overload or a loose neutral.
- ElectricalBulbs Burning Out FastPremature bulb failure points to high voltage, vibration, poor contacts, or wrong dimmer.
- ElectricalFlickering Whole HouseWhole-house flicker suggests utility supply issues, loose main neutral, or large motor loads on the service.
- ElectricalSmoke Alarm ChirpingPeriodic chirps usually mean low battery, end of life, or dust — pattern matters on hardwired units.
- ElectricalOutdoor Outlet DeadDead exterior outlets are often a tripped GFCI indoors, moisture in the box, or a tripped breaker.
- ElectricalTwo-Prong OutletsUngrounded two-prong outlets limit safe grounding for modern electronics — understand options before upgrading.
- ElectricalElectrical Panel Is FullNo open breaker spaces blocks EV chargers, heat pumps, and subpanels — plan a tandem audit or upgrade.
- ElectricalGarage Outlet Keeps TrippingGarage GFCI trips from moisture, freezer faults, or garage door opener leakage.
- ElectricalPool Light Not WorkingPool lights combine water, electricity, and sealed niches — leaks and tripped GFCIs are common.
- ElectricalDoorbell Not WorkingSilent doorbells trace to button, transformer, chime, or smart doorbell wiring.
- ElectricalCeiling Fan WobblingFan wobble comes from blade balance, loose mounting, or a bent blade — fix before it loosens the box.
- ElectricalDimmer Switch BuzzingBuzzing dimmers often mean incompatible LEDs, overloaded dimmer, or loose wire.
- AppliancesDryer Not HeatingAn electric dryer that tumbles but stays cold usually means a tripped breaker, blown thermal fuse, or failed heating element.
- AppliancesDryer Takes Too LongLong dry times are almost always restricted vent airflow or overloaded drum before heater failure.
- AppliancesOven Not HeatingOven not reaching temperature traces to breaker, igniter, bake element, or temperature sensor.
- AppliancesFridge Not CoolingWarm fridge with running compressor often means dirty coils, failed fan, or sealed system leak.
- AppliancesMicrowave Not HeatingMicrowave runs but does not heat usually means failed magnetron, diode, or door switch — rarely DIY.
- SafetyScorched BreakerDiscoloration or melt on a breaker means arcing — replace breaker and investigate circuit immediately.
- SafetySparking OutletVisible sparks from an outlet mean damaged contacts or short — stop using and shut breaker.
- SafetyHot Ceiling FixtureA hot ceiling fixture or globe means wrong bulb wattage or buried insulation on IC rating violation.
Questions about hiring in Dallas
How much do electricians charge in Dallas?
Do I need a licensed professional in Texas?
Is a permit required in Dallas?
How do I verify a contractor's licence?
Other trades in Dallas
- Plumbers in DallasLicensed plumbing contractors for water heaters, leaks, drains, fixtures and repiping.
- HVAC Contractors in DallasHeating, cooling and refrigeration contractors for service, replacement and duct work.
- Roofers in DallasRoofing contractors for leak repair, replacement, storm damage and inspections.
- Carpenters in DallasFraming, finish carpentry, decks, stairs and structural repair contractors.
- Trade Schools in DallasAccredited trade and technical schools offering programs in the skilled trades.
- Apprenticeship Programs in DallasRegistered apprenticeship programs through union locals, contractor associations and employers.