Minneapolis, MN
HVAC Contractors in Minneapolis
Heating, cooling and refrigeration contractors for service, replacement and duct work. Local labor in Minneapolis runs about 10 percent above the national median, which is the adjustment to apply before you use any national price.
- Metro population
- 425,115
- Labor cost index
- 1.10×
- State
- Minnesota
Emergency and utility numbers in Minnesota
For gas odor, downed power lines, or flooding, call 911 or your utility emergency line first — not a contractor. After the immediate hazard is controlled, hire licensed pros for permanent repair.
- 911 — fire, medical, immediate life safety
- Gas odor — leave the building, do not switch lights, call your gas utility emergency number from outside
- Power outage / lines down — utility emergency line; stay away from downed conductors
Trade owners in Minneapolis
Claiming your profile is free — correct licence, service area, and contact. No lead fees and no paid placement.
Claim your businessHVAC Contractors listed in Minneapolis
No listings here yet
We publish a listing only where the organization asked to be listed, or where every field came from a public licence register. Neither has happened for hvac contractors in Minneapolis yet, so there is nothing to show — rather than a page of names scraped from somewhere and presented as vetted.
The costs, licensing and verification steps below apply regardless. If you run a business here, listing is free and always will be.
What the work costs here
National ranges adjusted by the Minneapolis labor index. Materials move far less by region than labor does, so treat these as directional — the range narrows once someone has actually seen the job.
- HVAC Technician median pay here
- $63,000
- National median $57,300
- Labor cost vs. national
- +10%
- Applied to the estimates below
- Metro population
- 425,115
- Minnesota
| Job | National typical | Minneapolis typical | Range here |
|---|---|---|---|
| HVAC System Replacement | $9,500 | $10,500 | $5,000–$22,000 |
| Air Conditioner Repair | $450 | $500 | $175–$2,800 |
| Mini-Split Installation | $6,500 | $7,200 | $3,300–$20,000 |
| Ductwork Replacement | $4,500 | $5,000 | $1,700–$11,000 |
| Heat Pump Conversion | $14,000 | $15,500 | $8,800–$27,500 |
| Furnace Replacement | $4,500 | $5,000 | $2,800–$8,800 |
| AC Refrigerant Recharge | $500 | $550 | $225–$2,000 |
| Thermostat Installation | $250 | $275 | $100–$550 |
| Air Handler Replacement | $4,000 | $4,400 | $2,200–$7,700 |
| AC Replacement | $7,500 | $8,300 | $5,000–$15,500 |
| Condenser Replacement | $4,500 | $5,000 | $2,800–$9,400 |
| Evaporator Coil Replacement | $2,800 | $3,100 | $1,300–$6,100 |
| Blower Motor Replacement | $650 | $725 | $375–$1,500 |
| Refrigerant Leak Repair | $750 | $825 | $325–$2,400 |
| Furnace Repair | $400 | $450 | $175–$1,300 |
| Heat Pump Replacement | $9,500 | $10,500 | $6,100–$20,000 |
| HVAC Maintenance Plan | $300 | $325 | $175–$650 |
| Duct Cleaning | $500 | $550 | $325–$1,000 |
| Duct Sealing | $1,200 | $1,300 | $450–$3,100 |
| Zoning System Installation | $4,500 | $5,000 | $2,200–$9,400 |
| Whole-House Humidifier | $750 | $825 | $450–$1,500 |
| Whole-House Dehumidifier | $2,800 | $3,100 | $1,700–$5,000 |
| Attic Fan Installation | $650 | $725 | $375–$1,300 |
| Air Purifier Installation | $1,100 | $1,200 | $550–$2,400 |
| Swamp Cooler Installation | $3,500 | $3,900 | $2,200–$6,100 |
How these numbers are derived
Permits and code in Minneapolis
Checked against the issuing authority on 2026-10-07. Fees and thresholds change — the link below is the authority, this page is not.
City of Minneapolis — Construction & Development Services
Online via Minneapolis Permit Portal (Accela) or in person at Public Service Center, 250 S. 4th St. Minnesota-licensed contractors required for most trade permits; separate Hennepin County rules may apply in unincorporated areas.
What needs a permit here
- Electrical panel upgrade, service replacement, or aluminum wiring remediation
- Water heater replacement and gas piping alterations
- HVAC furnace, boiler, or central AC changeout
- Roof replacement when decking is replaced or ice-dam repairs involve structural work
- Deck, porch, or addition requiring frost-depth footing inspection
- Sewer line replacement, sump pump discharge, or interior drain tile work
| Permit | Published fee | Notes |
|---|---|---|
| Residential Building Permit Base | $85.00 - $120.00 minimum | Minneapolis fee schedule; larger valuations increase total permit cost. |
| Electrical Permit | $90.00 - $140.00 | Service size and circuit count drive fee components. |
| Plumbing Water Heater Permit | $70.00 - $95.00 | Includes expansion tank and relief discharge on closed-loop systems. |
| Mechanical HVAC Permit | $80.00 - $125.00 | Combustion air, venting, and efficiency documentation at inspection. |
Local amendments worth knowing
Cities adopt the model codes then amend them. The amendments are what catch people out, because a national guide will not mention them.
Minnesota State Building Code (2020 IRC / IBC)
Minneapolis enforces state code with local amendments for energy, accessibility, and rental licensing tie-ins.
Read the amendmentMinneapolis Energy Conservation Ordinance
Some rental and commercial properties face additional energy disclosure or upgrade requirements on major permits.
Read the amendmentMinneapolis Tree Protection / Boulevard Rules
Boulevard and protected tree work may require forestry approval before related construction permits.
Read the amendment
Verify a licence
Minnesota DLI — Electrical
Electrical contractors and journeyman electricians
Public licence lookupMinnesota DLI — Plumbing
Plumbing contractors and journeyman plumbers
Public licence lookupMinnesota DLI — HVAC / Mechanical
HVAC and mechanical contractors
Public licence lookupMinnesota Board of Architecture, Engineering, Land Surveying
Professional Engineers (PE) for structural and snow-load design
Public licence lookup
Conditions that change the job here
- Deep frost line (42+ inches) requires proper footing depth for decks, additions, and sewer laterals.
- Ice dams and heavy snow loads drive roof and attic air-sealing work on older two-story homes.
- Extreme cold snaps stress furnaces and demand freeze protection for exterior hose bibs and irrigation.
- Mississippi River gorge and lakeshore parcels face stricter stormwater and erosion controls.
- Twin Cities labor market and union scale push installed costs above national medians.
Local context for Minneapolis, MN
Permit rules, fees, and housing-stock conditions change by city even within the same state. These facts come from the researched metro profile — not from a template with the city name swapped in.
Permit office
City of Minneapolis — Construction & Development Services · Filing information · (612) 673-3000
Common permit triggers here
- Electrical panel upgrade, service replacement, or aluminum wiring remediation
- Water heater replacement and gas piping alterations
- HVAC furnace, boiler, or central AC changeout
- Roof replacement when decking is replaced or ice-dam repairs involve structural work
- Deck, porch, or addition requiring frost-depth footing inspection
- Sewer line replacement, sump pump discharge, or interior drain tile work
Local conditions that change the work
- Deep frost line (42+ inches) requires proper footing depth for decks, additions, and sewer laterals.
- Ice dams and heavy snow loads drive roof and attic air-sealing work on older two-story homes.
- Extreme cold snaps stress furnaces and demand freeze protection for exterior hose bibs and irrigation.
- Mississippi River gorge and lakeshore parcels face stricter stormwater and erosion controls.
- Twin Cities labor market and union scale push installed costs above national medians.
Verify before you hire in Minnesota
Check the licence with the Minnesota board
EPA Section 608 is required nationwide to handle refrigerant. Many states add a separate HVAC contractor or mechanical license. Search the number in the state's public lookup, confirm it is active, and confirm the classification covers your job rather than something adjacent to it.
Have the insurer send the certificate
Ask for general liability and workers' compensation to be sent to you directly by the insurance agent. A PDF forwarded by the contractor proves the document existed once, not that the policy is current.
Get the scope in writing, with exclusions
What is included matters less than what is excluded. Permits, disposal, patching, and code upgrades triggered by the work are the four line items that most often turn into change orders.
Confirm who pulls the permit
Permit thresholds are municipal in Minnesota. The licence holder should pull it. If you are asked to pull it as a homeowner on licensed work, you are absorbing their liability.
Never pay the full amount up front
A deposit for materials on a large job is normal. Paying in full before work begins is not, and several states cap what a contractor may take as a deposit.
Work out the problem before you call
- CoolingAir Conditioner Not CoolingWork through the causes of an air conditioner that runs but does not cool, ordered from most to least likely.
- HeatingFurnace Not HeatingDiagnose a gas furnace that will not fire, short cycles, or blows cold air, starting with what you can safely check.
- HeatingFurnace Short CyclingA furnace that turns on and off every few minutes instead of running a full heating cycle — what causes it and what each fix costs.
- CoolingAC Freezing UpIce on your AC lines or evaporator coil — why it happens, what to do right now, and what the underlying repair costs.
- CoolingAC Blowing Warm AirYour air conditioner runs but the air from the vents is warm — work through the causes from cheapest to most expensive.
- HeatingFurnace Blowing Cold AirThe furnace runs but the air from your vents is cold or lukewarm — diagnose the cause before calling for an expensive repair.
- HeatingFurnace Blower Won't Stop RunningThe furnace blower runs continuously even when heating or cooling is not called — find out why and what it costs to fix.
- HVACThermostat Screen BlankA blank thermostat display usually means no power to the device — work through the causes before assuming the whole system has failed.
- CoolingAC Leaking WaterWater under the indoor air handler or furnace — usually a clogged condensate drain, not refrigerant — can damage ceilings if the pan overflows.
- CoolingAC Smells MustyMusty odor when AC runs points to mold on the evaporator coil, dirty drain pan, or duct moisture — not normal and worth cleaning before peak season.
- CoolingAC Making Screeching NoiseHigh-pitched screeching from the outdoor unit or air handler often means a failing belt, bearing, or compressor — shut down if grinding accompanies the noise.
- CoolingOutdoor AC Unit Not RunningIndoor fan runs but the condenser stays silent — check disconnect, breaker, thermostat call, and contactor before assuming compressor failure.
- CoolingAC Tripping BreakerA breaker that trips when AC starts or runs points to locked compressor, bad capacitor, shorted wire, or dirty coil raising amp draw.
- CoolingAC Running ConstantlyAC that never cycles off may be undersized for the heat load, low on refrigerant, fighting poor insulation, or set to fan On instead of Auto.
- CoolingIce on Refrigerant LineFrost or ice on the suction line or outdoor unit means restricted airflow or low charge — turn cooling off and thaw before serious compressor damage.
- CoolingMini Split Not CoolingA ductless head that blows warm air while others cool — filter, refrigerant leak, mode setting, or communication fault between indoor and outdoor units.
- HeatingFurnace Smells Like GasRotten-egg odor near a gas furnace is an emergency — leave, do not switch lights, and call the gas utility from outside; brief smell on startup may be normal if it dissipates.
- HeatingFurnace Pilot Won't LightOlder standing-pilot furnaces need gas flow, thermocouple signal, and clean pilot orifice — electronic ignition systems differ; know your type before troubleshooting.
- HeatingFurnace Making a BoomA loud bang at furnace startup is delayed ignition — gas builds before flame lights — and can crack heat exchangers or harm occupants over time.
- HeatingHeat Pump Blowing ColdHeat pumps blow cooler-than-furnace air normally — but icy cold air in heat mode means defrost failure, reversing valve stuck, or auxiliary heat not engaging.
- HeatingUneven Heating Between RoomsSome rooms cold while others roast — duct balance, insulation, solar gain, or equipment sizing — not always a failing furnace.
- HVACVents Blowing Weak AirLow airflow at registers reduces heating and cooling — filter, blower, duct leaks, or crushed flex are the usual suspects before replacing equipment.
- HVACThermostat Won't Change TemperatureSetpoint changes but nothing happens — dead batteries, locked schedule, wiring, or equipment lockout — verify the display and whether heat or cool actually calls.
- HVACHigh Humidity IndoorsSticky indoor air above 55% RH — oversized AC, poor ventilation, basement moisture, or short cycles — risks mold and discomfort even when temperature feels OK.
- SafetyCarbon Monoxide Alarm Going OffCO alarms signal incomplete combustion — evacuate and call 911 or the fire department from outside.
- SafetyRadon Test Came Back HighElevated radon needs mitigation — sealing alone rarely fixes; active depressurization is standard.
Questions about hiring in Minneapolis
How much do hvac contractors charge in Minneapolis?
Do I need a licensed professional in Minnesota?
Is a permit required in Minneapolis?
How do I verify a contractor's licence?
Other trades in Minneapolis
- Electricians in MinneapolisLicensed electrical contractors for panel work, wiring, troubleshooting and code corrections.
- Plumbers in MinneapolisLicensed plumbing contractors for water heaters, leaks, drains, fixtures and repiping.
- Roofers in MinneapolisRoofing contractors for leak repair, replacement, storm damage and inspections.
- Carpenters in MinneapolisFraming, finish carpentry, decks, stairs and structural repair contractors.
- Trade Schools in MinneapolisAccredited trade and technical schools offering programs in the skilled trades.
- Apprenticeship Programs in MinneapolisRegistered apprenticeship programs through union locals, contractor associations and employers.