Skip to main content
True Trade Path

Austin, TX

Roofers in Austin

Roofing contractors for leak repair, replacement, storm damage and inspections. Local labor in Austin runs about 2 percent above the national median, which is the adjustment to apply before you use any national price.

Metro population
979,882
Labor cost index
1.02×
State
Texas

Emergency and utility numbers in Texas

For gas odor, downed power lines, or flooding, call 911 or your utility emergency line first — not a contractor. After the immediate hazard is controlled, hire licensed pros for permanent repair.

  • 911 — fire, medical, immediate life safety
  • Gas odor — leave the building, do not switch lights, call your gas utility emergency number from outside
  • Power outage / lines down — utility emergency line; stay away from downed conductors

Trade owners in Austin

Claiming your profile is free — correct licence, service area, and contact. No lead fees and no paid placement.

Claim your business

Roofers listed in Austin

No listings here yet

We publish a listing only where the organization asked to be listed, or where every field came from a public licence register. Neither has happened for roofers in Austin yet, so there is nothing to show — rather than a page of names scraped from somewhere and presented as vetted.

The costs, licensing and verification steps below apply regardless. If you run a business here, listing is free and always will be.

What the work costs here

National ranges adjusted by the Austin labor index. Materials move far less by region than labor does, so treat these as directional — the range narrows once someone has actually seen the job.

Roofer median pay here
$51,000
National median $50,030
Labor cost vs. national
+2%
Applied to the estimates below
Metro population
979,882
Texas
Typical job costs in Austin, adjusted from national ranges
JobNational typicalAustin typicalRange here
Roof Replacement$16,000$16,500$8,200–$46,000
Gutter Replacement$1,800$1,800$1,000–$4,100
Chimney Repair$2,000$2,000$500–$8,200
Roof Repair$750$775$250–$2,600
Shingle Replacement$2,500$2,600$825–$6,600
Metal Roof Installation$22,000$22,500$12,000–$46,000
Flat Roof Replacement$8,500$8,700$4,100–$18,500
Skylight Installation$1,800$1,800$925–$5,600
Soffit and Fascia Repair$1,400$1,400$400–$5,100
Gutter Guard Installation$1,600$1,600$825–$4,600
Roof Inspection$275$275$150–$550
Chimney Rebuild$7,500$7,700$3,600–$16,500
Chimney Sweep$275$275$150–$550

How these numbers are derived

National ranges are multiplied by a 1.02× labor index for Austin. The index is an approximation for planning, not a wage survey, and it applies to labor rather than to materials. Use it to sanity-check a quote, not to argue one down to the dollar.

Permits and code in Austin

Checked against the issuing authority on 2026-10-06. Fees and thresholds change — the link below is the authority, this page is not.

City of Austin Development Services Department (DSD)

Online via Austin Build + Connect (AB+C) portal. Trade permits require licensed contractors registered with Austin Development Services.

Permit office website(512) 978-4000

What needs a permit here

  • Electrical panel upgrades, EV charger installations, or solar PV interconnects
  • Water heater replacement (gas, electric, or heat pump) and main line work
  • HVAC unit replacement, heat pump conversion, or duct sealing verification
  • Tree removal or root pruning for trees over 19 inches DBH (Protected Trees)
  • Foundation repair, piers, retaining walls over 4 feet, or deck construction
  • Whole-house plumbing repipes, sewer line replacements, or backflow assembly installs
Published permit fees for Austin
PermitPublished feeNotes
Residential Base Permit Application Fee$85.00 base + $17.26 processing feePer City of Austin FY 2026-27 Fee Schedule effective Oct 1, 2026.
Electrical Trade Permit Fee$90.00 - $145.00Based on circuit count and main service disconnect rating; Austin Energy application fee may apply.
Plumbing Water Heater Permit$75.00 - $95.00Includes expansion tank, relief valve, and gas piping safety pressure test.
HVAC Commercial / Residential Changeout$43.09 first system + $9.99 per additional unitCovers mechanical changeout permit; separate electrical permit required.

Local amendments worth knowing

Cities adopt the model codes then amend them. The amendments are what catch people out, because a national guide will not mention them.

  • Austin Energy Design Criteria & Electrical Code (2020 NEC Amendments)

    Requires strict clearance around electric meters, outdoor emergency disconnects, and utility-accessible solar shutdown switches.

    Read the amendment

  • City of Austin Tree Protection Ordinance (Land Development Code Chapter 25-8)

    Enforces strict protection for Protected Trees (19"+ DBH) and Heritage Trees (30"+ DBH) with mandatory tree preservation plans before permit issuance.

    Read the amendment

  • Austin Residential Energy Code (2021 IECC Amendments / ECAD)

    Mandates duct leakage testing (<4 CFM per 100 sq ft) for HVAC replacements and mandatory Energy Conservation Audit and Disclosure (ECAD) during home sales.

    Read the amendment

Verify a licence

  • Texas Department of Licensing and Regulation (TDLR) — Electrical

    Master Electrician, Journeyman, & Electrical Contractor Licenses

    Public licence lookup

  • Texas State Board of Plumbing Examiners (TSBPE)

    Master Plumber, Journeyman Plumber, & Plumbing Contractor Licenses

    Public licence lookup

  • TDLR Air Conditioning and Refrigeration (ACR)

    Class A & B Environmental & Commercial ACR Licenses

    Public licence lookup

  • Texas Board of Professional Engineers and Land Surveyors

    PE sign-off for foundation engineering and tree protection plans

    Public licence lookup

Conditions that change the job here

  • Highly expansive black clay soil ('Houston Black clay') east of IH-35 causes severe foundation shifting, requiring engineered piers and slab watering.
  • Shallow limestone bedrock ('Balcones Fault zone') west of IH-35 drastically increases excavation and trenching costs for plumbing and underground electric.
  • Hot summers and high heat index require minimum 14.3 SEER2 cooling equipment and Austin Energy rebate-compliant heat pumps.
  • Extreme flash flooding in the Hill Country ('Flash Flood Alley') dictates strict watershed protection rules and elevated equipment pads.
  • Hard municipal water supply accelerates scale buildup in tankless and tank water heaters.

Local context for Austin, TX

Permit rules, fees, and housing-stock conditions change by city even within the same state. These facts come from the researched metro profile — not from a template with the city name swapped in.

Permit office

City of Austin Development Services Department (DSD) · Filing information · (512) 978-4000

Common permit triggers here

  • Electrical panel upgrades, EV charger installations, or solar PV interconnects
  • Water heater replacement (gas, electric, or heat pump) and main line work
  • HVAC unit replacement, heat pump conversion, or duct sealing verification
  • Tree removal or root pruning for trees over 19 inches DBH (Protected Trees)
  • Foundation repair, piers, retaining walls over 4 feet, or deck construction
  • Whole-house plumbing repipes, sewer line replacements, or backflow assembly installs

Local conditions that change the work

  • Highly expansive black clay soil ('Houston Black clay') east of IH-35 causes severe foundation shifting, requiring engineered piers and slab watering.
  • Shallow limestone bedrock ('Balcones Fault zone') west of IH-35 drastically increases excavation and trenching costs for plumbing and underground electric.
  • Hot summers and high heat index require minimum 14.3 SEER2 cooling equipment and Austin Energy rebate-compliant heat pumps.
  • Extreme flash flooding in the Hill Country ('Flash Flood Alley') dictates strict watershed protection rules and elevated equipment pads.
  • Hard municipal water supply accelerates scale buildup in tankless and tank water heaters.
Source: Metro profile research · checked 2026-10-06

Verify before you hire in Texas

  1. Check the licence with the Texas board

    Many states license roofing contractors specifically; individual roofers usually are not licensed. Search the number in the state's public lookup, confirm it is active, and confirm the classification covers your job rather than something adjacent to it.

  2. Have the insurer send the certificate

    Ask for general liability and workers' compensation to be sent to you directly by the insurance agent. A PDF forwarded by the contractor proves the document existed once, not that the policy is current.

  3. Get the scope in writing, with exclusions

    What is included matters less than what is excluded. Permits, disposal, patching, and code upgrades triggered by the work are the four line items that most often turn into change orders.

  4. Confirm who pulls the permit

    Permit thresholds are municipal in Texas. The licence holder should pull it. If you are asked to pull it as a homeowner on licensed work, you are absorbing their liability.

  5. Never pay the full amount up front

    A deposit for materials on a large job is normal. Paying in full before work begins is not, and several states cap what a contractor may take as a deposit.

Work out the problem before you call

Questions about hiring in Austin

How much do roofers charge in Austin?
Local labor in Austin runs about 2 percent above the national median, so a national estimate should be adjusted accordingly. Against a national median of $50,030 a year, roofers in this metro earn closer to $51,000, and service rates track that difference.
Do I need a licensed professional in Texas?
Many states license roofing contractors specifically; individual roofers usually are not licensed. Confirm the licence number with the Texas board before work begins, and confirm the classification covers your specific job.
Is a permit required in Austin?
Permit thresholds are set municipally and differ even between neighbouring cities in Texas. As a rule, anything altering electrical service, gas piping, drain-waste-vent, or structure requires one. The contractor holding the licence should pull it — if they ask you to pull it as a homeowner on work like that, treat it as a warning.
How do I verify a contractor's licence?
The Texas licensing board publishes a free public lookup. Search the licence number, confirm it is active rather than expired or suspended, and confirm the name on the licence matches the business on your quote. Then have the certificate of insurance sent to you directly by the insurer.

Other trades in Austin