Gutter Replacement Cost

National cost range

Low end

$1,000

Simple access, like-for-like

Typical

$1,800

What most jobs come in at

High end

$4,000

Upgrades, difficult access, code work

What you are actually paying for

Find the row that matches your situation. Quotes that differ wildly from each other usually differ in scope, not in price.

What moves the price

In descending order of impact. These are also the questions worth asking a contractor whose quote sits outside the range above.

1. 1

   Material

   Seamless aluminum is standard at $5 to $12 per linear foot installed. Copper runs $25 to $40 per foot. Steel and zinc are mid-range options.

2. 2

   Linear footage and stories

   A typical home has 150 to 250 linear feet of gutter. Two-story homes cost more in labor for height access.

3. 3

   Gutter guards

   Mesh or reverse-curve gutter guards add $4 to $12 per linear foot. They reduce cleaning frequency but are not maintenance-free.

4. 4

   Downspout count and routing

   Each downspout needs a splash block or underground drain connection. Underground drainage adds $200 to $500 per downspout.

5. 5

   Fascia repair

   Rotted fascia behind existing gutters must be replaced before new gutters mount. Fascia repair adds $6 to $12 per linear foot.

Direct answer

Replacing seamless aluminum gutters on a typical home with about 200 linear feet costs $1,000 to $4,000 installed nationwide in 2026, with most projects near $1,500 to $2,200 for standard aluminum, downspouts, and hangers. Copper, steel, gutter guards, fascia repair, and underground drain tie-ins push toward the high end. Height access on two-story homes and rotted fascia behind old gutters are the usual reasons a simple per-foot quote does not match your house.

What each price band actually buys

Low end

Single-story home, ~150 linear feet seamless aluminum, standard downspouts, splash blocks, minimal fascia repair.

Typical

~200 linear feet on a two-story home, new hangers, downspouts, end caps, basic color match, haul-away of old gutters.

High end

Copper or premium metal, gutter guards on full perimeter, multiple story heights, fascia replacement, underground drain connections.

Labor vs materials

Typical split for this job nationally: roughly 55% labor and 45% materials. Crew size is usually 2–3 installers, across one day for most homes; two days with fascia or guards.

What this price usually does not include

• Roof replacement or full re-flashing unless bundled
• Foundation drainage system design beyond downspout extensions
• Siding repair above the roofline unrelated to gutter mounting
• Interior drywall repair from prior overflow leaks
• Tree trimming to clear roofline access
• Gutter cleaning on an ongoing maintenance contract unless sold separately

Hidden costs that show up on real jobs

Regional variation

Gutter pricing is labor-heavy but less volatile than structural trades: dense Northeast and West Coast metros may add 15–25% to install labor versus rural Midwest pricing, while material costs stay relatively national. Snow-load regions sometimes specify heavier gauge or extra hangers. Compare per-linear-foot bids only when gauge, profile, and downspout count match; use `/home/cost/gutter-replacement/[metro]` when published.

Code upgrades this job can trigger

• Proper slope (typically 1/4 inch per 10 feet) toward downspouts
• Hanger spacing per manufacturer for snow and wind loads in northern climates
• Splash blocks or approved drainage discharge away from foundation
• Separation from roof drip edge when re-roofing coordination is required

Repair vs replace

Seam sealing, hanger tuning, and isolated section replacement can extend aluminum gutters that are otherwise straight and rust-free. Replace when seams fail repeatedly, gutters pull away from rotted fascia, rust holes appear, or pitch cannot be corrected without full re-hang. Partial replacement on one slope is common after storm damage; mixing very old and new sections on the full perimeter often looks mismatched and leaks at joints. If fascia is soft behind more than one run, replace gutters and fascia together.

Timeline and visits

A standard single-story replacement is often one day on site. Two-story homes or fascia work may take two days. Seamless gutters are formed on site—no long material lead time unless copper is special-ordered. Rain can delay outdoor work; schedule before heavy leaf season if guards are part of the scope.

Quote checklist — line items a fair bid should show

1. Total linear feet measured and number of downspouts
2. Material gauge, profile, and color
3. Hanger type and spacing
4. Downspout locations and discharge method (splash block vs underground)
5. Fascia repair allowance per linear foot if needed
6. Removal and disposal of existing gutters
7. Gutter guard product and coverage if included
8. Warranty on workmanship and materials

Questions to ask before you sign

• Did you inspect fascia behind the gutters, and what is included if rot is found?
• What gutter pitch will you achieve at the longest runs?
• Are downspouts sized for the roof area they drain?
• If I add guards later, will the gutter profile support them?
• Is haul-away and recycling of old aluminum included?
• What happens if a seam leaks in the first year—labor warranty?

Quote red flags for this job

• Per-foot price with no total linear footage on the contract
• Sectional gutters sold as seamless
• No plan to replace rotted fascia before hanging new gutters
• Extremely low bid with no downspout count
• Full payment required before installation day
• Contractor cannot show insurance for ladder and roofline work

Payment schedule norms

Many gutter companies take 10–20% to schedule, with balance on completion. Same-day completion jobs often allow payment after install. Avoid large deposits for commodity aluminum work.

Seasonality

Late spring and fall are busy before and after leaf season. Winter installs are common in mild climates. Pair gutter replacement with roofing when possible to reset flashing and drip edge once.

Can you do it yourself?

When this cannot wait

• Gutters pulling away from the fascia
• Overflow during rain causing foundation erosion
• Visible rust holes or separated seams leaking

Common questions