Skip to main content
True Trade Path

Houston, TX

Plumbers in Houston

Licensed plumbing contractors for water heaters, leaks, drains, fixtures and repiping. Local labor in Houston runs about 4 percent below the national median, which is the adjustment to apply before you use any national price.

Metro population
2,314,157
Labor cost index
0.96×
State
Texas

Emergency and utility numbers in Texas

For gas odor, downed power lines, or flooding, call 911 or your utility emergency line first — not a contractor. After the immediate hazard is controlled, hire licensed pros for permanent repair.

  • 911 — fire, medical, immediate life safety
  • Gas odor — leave the building, do not switch lights, call your gas utility emergency number from outside
  • Power outage / lines down — utility emergency line; stay away from downed conductors

Trade owners in Houston

Claiming your profile is free — correct licence, service area, and contact. No lead fees and no paid placement.

Claim your business

Plumbers listed in Houston

How this list is ordered

By default, businesses appear in order of verification depth — what we were able to confirm and when — then by how long they have been operating. Distance is not used because we do not know where you are standing, and payment never changes this order. There is no paid placement, no boost, and no tie-break that favors an advertiser. Filters below reorder the same list on your device only; they do not create new pages or new URLs.

Narrow the list in Houston

Use these controls to match your job. This is not a “best in Houston” ranking — it is the same sourced directory, filtered locally in your browser.

Quick filters

Showing 1 of 1 listings

John Moore Services · Website

Drain cleaning · Water heater replacement · Repiping · AC and heating

Address
10005 W Sam Houston Pkwy N, Houston, TX 77064
Service area
Harris County and Greater Houston
Licence
REG13357 · TX · Plumber Contractor Registration (active)
Established
1965
Verified against a public source

Checked 2026-03-01 against Texas State Board of Plumbing Examiners license search · source

What the work costs here

National ranges adjusted by the Houston labor index. Materials move far less by region than labor does, so treat these as directional — the range narrows once someone has actually seen the job.

Plumber median pay here
$59,000
National median $61,550
Labor cost vs. national
-4%
Applied to the estimates below
Metro population
2,314,157
Texas
Typical job costs in Houston, adjusted from national ranges
JobNational typicalHouston typicalRange here
Water Heater Replacement$1,800$1,700$875–$3,300
Sewer Line Repair & Replacement$7,000$6,700$1,400–$29,000
Whole-House Repiping$9,000$8,600$3,800–$17,500
Water Softener Installation$1,800$1,700$775–$3,400
Well Pump Replacement$1,800$1,700$775–$3,800
Toilet Replacement$350$325$200–$675
Shower Valve & Cartridge Replacement$500$475$200–$1,400
Slab Leak Repair$3,500$3,400$1,400–$7,700
Sump Pump Installation$2,000$1,900$950–$4,300
Tankless Water Heater Conversion$5,500$5,300$3,400–$8,600
Drain Cleaning$225$225$95–$425
Hydro-Jetting$650$625$325–$1,200
Sewer Camera Inspection$400$375$200–$775
Leak Detection$350$325$150–$875
Faucet Replacement$325$300$175–$625
Garbage Disposal Replacement$375$350$200–$575
Main Shutoff Valve Replacement$300$300$150–$575
Pressure Regulator Replacement$400$375$200–$725
Water Line Replacement$4,500$4,300$1,900–$9,600
Sewer Line Replacement$15,000$14,500$7,700–$29,000
Gas Line Installation$1,200$1,200$475–$3,400
Bathtub Replacement$3,500$3,400$1,400–$7,700
Shower Pan Replacement$2,500$2,400$950–$5,300
Water Heater Repair$350$325$150–$725
Frozen Pipe Repair$600$575$200–$2,400
Outdoor Spigot Replacement$275$275$150–$475
Septic Tank Pumping$400$375$250–$675
Septic System Replacement$18,000$17,500$9,600–$33,500
Water Filtration Installation$1,500$1,400$475–$3,800
Well Pressure Tank Replacement$750$725$375–$1,300
Backflow Preventer Installation$400$375$200–$875
Bidet Installation$500$475$250–$1,200
Washing Machine Hookup$350$325$150–$775
Pipe Insulation$450$425$200–$1,200
Bathroom Remodel$15,000$14,500$5,800–$38,500
Basement Waterproofing$7,000$6,700$2,900–$14,500
Sprinkler System Installation$4,500$4,300$2,700–$10,500
French Drain Installation$5,000$4,800$2,100–$15,500
Yard Drainage Correction$4,000$3,800$1,700–$13,500
Dishwasher Installation$375$350$200–$900
Washer and Dryer Installation$400$375$175–$1,200
Crawlspace Encapsulation$10,000$9,600$5,300–$25,000
Water Damage Restoration$5,500$5,300$2,100–$25,000
Radon Mitigation$1,600$1,500$875–$4,000
Crawl Space Vapor Barrier$3,200$3,100$1,500–$8,200
Sewage Cleanup$5,000$4,800$2,100–$16,500

How these numbers are derived

National ranges are multiplied by a 0.96× labor index for Houston. The index is an approximation for planning, not a wage survey, and it applies to labor rather than to materials. Use it to sanity-check a quote, not to argue one down to the dollar.

Permits and code in Houston

Checked against the issuing authority on 2026-10-06. Fees and thresholds change — the link below is the authority, this page is not.

City of Houston Permitting Center

Online via iPS (iPermits) portal or in person at 1002 Washington Ave. Trade permits (electrical, plumbing, HVAC) require a state-licensed contractor registered with the city.

Permit office website(832) 394-8841

What needs a permit here

  • Complete replacement or relocation of residential water heaters (gas or electric)
  • Electrical service panel upgrades, subpanel installations, or major circuit additions
  • Full HVAC system unit replacements or new ductwork installation
  • Residential re-roofing exceeding 100 square feet or any structural decking repair
  • Whole-house plumbing repiping, sewer line replacement, or main gas line work
  • Structural alterations, exterior wall framing changes, or slab repairs
Published permit fees for Houston
PermitPublished feeNotes
Minimum Residential Permit Fee$85.00 base + $30.22 admin feeCity of Houston Building Code Fee Schedule for basic repairs or single-trade residential scope.
Residential Electrical Permit$75.00 base + $10.50 per circuitPlus standard administration fee; panel replacements billed based on total service amperage.
Water Heater Permit Fee$65.00 - $85.00Base plumbing permit fee including initial and final inspection fees.
HVAC Unit Changeout Permit$80.00 base + $15.00 per unitCovers mechanical equipment replacement and required system leak/duct performance checks.

Local amendments worth knowing

Cities adopt the model codes then amend them. The amendments are what catch people out, because a national guide will not mention them.

  • 2021 Houston Building Code (Chapter 19 Floodplain)

    Requires finished floor elevation and mechanical/electrical equipment to be elevated a minimum of 24 inches above the 500-year base flood elevation (BFE).

    Read the amendment
  • Houston Electrical Code (2020 NEC Amendments)

    Mandates arc-fault circuit interrupter (AFCI) protection on all 15A and 20A branch circuits during residential remodels, with strict conduit fill and temperature derating rules.

    Read the amendment
  • Houston Plumbing Code (2021 UPC Amendments)

    Requires expansion tanks on all closed-loop water heating installations and backflow prevention assemblies on all irrigation supply lines.

    Read the amendment

Verify a licence

  • Texas Department of Licensing and Regulation (TDLR) — Electrical

    Master & Journeyman Electricians, Electrical Contractors

    Public licence lookup
  • Texas State Board of Plumbing Examiners (TSBPE)

    Master Plumbers, Journeyman Plumbers, Plumbing Contractors

    Public licence lookup
  • TDLR Air Conditioning and Refrigeration (ACR)

    Class A & Class B Air Conditioning Contractors

    Public licence lookup
  • Texas Board of Professional Engineers and Land Surveyors

    Professional Engineers (PE) for structural and windstorm sign-off

    Public licence lookup

Conditions that change the job here

  • Extreme humidity and prolonged summer heat demand elevated HVAC cooling capacity and strict adherence to 14.3 SEER2 minimum efficiency standards.
  • High hurricane and tropical storm exposure requires windstorm resistance up to 130 mph design wind speeds, including reinforced roof decking and hurricane ties.
  • Expansive clay soils ('Houston black clay') undergo severe swell-shrink cycles, causing frequent foundation shifting that stresses underground plumbing and sewer laterals.
  • Low topography and tropical rain events create high localized flood risk, making raised compressor pads (12+ inches above grade) and elevated electrical panels standard requirements.
  • Hard municipal water supply contributes to accelerated mineral scaling in tankless and tank water heaters, making sacrificial anode inspections and flush valves essential.

Local context for Houston, TX

Permit rules, fees, and housing-stock conditions change by city even within the same state. These facts come from the researched metro profile — not from a template with the city name swapped in.

Permit office

City of Houston Permitting Center · Filing information · (832) 394-8841

Common permit triggers here

  • Complete replacement or relocation of residential water heaters (gas or electric)
  • Electrical service panel upgrades, subpanel installations, or major circuit additions
  • Full HVAC system unit replacements or new ductwork installation
  • Residential re-roofing exceeding 100 square feet or any structural decking repair
  • Whole-house plumbing repiping, sewer line replacement, or main gas line work
  • Structural alterations, exterior wall framing changes, or slab repairs

Local conditions that change the work

  • Extreme humidity and prolonged summer heat demand elevated HVAC cooling capacity and strict adherence to 14.3 SEER2 minimum efficiency standards.
  • High hurricane and tropical storm exposure requires windstorm resistance up to 130 mph design wind speeds, including reinforced roof decking and hurricane ties.
  • Expansive clay soils ('Houston black clay') undergo severe swell-shrink cycles, causing frequent foundation shifting that stresses underground plumbing and sewer laterals.
  • Low topography and tropical rain events create high localized flood risk, making raised compressor pads (12+ inches above grade) and elevated electrical panels standard requirements.
  • Hard municipal water supply contributes to accelerated mineral scaling in tankless and tank water heaters, making sacrificial anode inspections and flush valves essential.
Source: Metro profile research · checked 2026-10-06

Verify before you hire in Texas

  1. Check the licence with the Texas board

    Nearly every state licenses journeyman and master plumbers; gas fitting is often a separate endorsement. Search the number in the state's public lookup, confirm it is active, and confirm the classification covers your job rather than something adjacent to it.

  2. Have the insurer send the certificate

    Ask for general liability and workers' compensation to be sent to you directly by the insurance agent. A PDF forwarded by the contractor proves the document existed once, not that the policy is current.

  3. Get the scope in writing, with exclusions

    What is included matters less than what is excluded. Permits, disposal, patching, and code upgrades triggered by the work are the four line items that most often turn into change orders.

  4. Confirm who pulls the permit

    Permit thresholds are municipal in Texas. The licence holder should pull it. If you are asked to pull it as a homeowner on licensed work, you are absorbing their liability.

  5. Never pay the full amount up front

    A deposit for materials on a large job is normal. Paying in full before work begins is not, and several states cap what a contractor may take as a deposit.

Work out the problem before you call

Questions about hiring in Houston

How much do plumbers charge in Houston?
Local labor in Houston runs about 4 percent below the national median, so a national estimate should be adjusted accordingly. Against a national median of $61,550 a year, plumbers in this metro earn closer to $59,000, and service rates track that difference.
Do I need a licensed professional in Texas?
Nearly every state licenses journeyman and master plumbers; gas fitting is often a separate endorsement. Confirm the licence number with the Texas board before work begins, and confirm the classification covers your specific job.
Is a permit required in Houston?
Permit thresholds are set municipally and differ even between neighbouring cities in Texas. As a rule, anything altering electrical service, gas piping, drain-waste-vent, or structure requires one. The contractor holding the licence should pull it — if they ask you to pull it as a homeowner on work like that, treat it as a warning.
How do I verify a contractor's licence?
The Texas licensing board publishes a free public lookup. Search the licence number, confirm it is active rather than expired or suspended, and confirm the name on the licence matches the business on your quote. Then have the certificate of insurance sent to you directly by the insurer.

Other trades in Houston