1,200 sq ft LVP, no stairs
Mid metro, no prep.
Often $7,000–$12,000 installed band — compare three quotes.
Estimator · Free
Flooring Cost Estimator
Room area, material, subfloor prep, stairs, and trim → installed price band by metro.
Expected in Denver
$3,400–$10,000
Typical $5,900
Shareable summary
Quick answer
Installed flooring commonly runs about $4–$12 per square foot for LVP or laminate and $9–$22 for tile or hardwood in many markets, before stairs or subfloor prep. Enter area, material, and options below for a regional band — then compare three itemized quotes.
What this assumes
- Installed ranges include labor and standard material — not furniture moving or asbestos abatement.
- Stairs add labor disproportionate to square footage.
- Subfloor prep assumes leveling or minor repair, not full plywood replacement.
Important
Quotes should specify transition strips, moisture mitigation on slab, and who removes existing flooring.
Understanding the result
Material drives the spread
LVP and laminate sit at the low end per square foot; tile and solid hardwood run higher due to labor and prep.
Prep is where estimates diverge
A flat subfloor installs fast. Rot, bounce, or slab moisture remediation can exceed material cost.
How the math works
Installed $ = sq ft × material $/sq ft × regional blend × multipliers for subfloor prep, stairs, and trim linear feet.
Where to find each input
- Room sq ft — measure or assessor living area subset
- Material quote sheet — $/sq ft installed from showroom
- Stair count — each flight
- Baseboard linear feet — perimeter minus openings
Worked examples
800 sq ft tile, prep on slab
Subfloor prep on.
Prep adds ~10–15% — verify moisture mitigation line item.
Stairs + LVP
14 stairs, 900 sq ft main level.
Stairs add disproportionate labor — itemize per tread on bids.
What this does not include
- Furniture moving
- Asbestos tile abatement
- Radiant heat tear-up
Regional adjustment
Coastal metros run 20–35% above median on labor-heavy flooring.
Accuracy and references
True Trade Path flooring-installation cost guide; RSMeans residential flooring medians.
Counterpart bridge
Pricing this on the contractor side?
This page interprets quotes and budgets from the buyer’s chair. The matching pro tool uses the same scope logic to build a defensible price.
Open Carpenter Hourly Rate CalculatorFor trade owners
Pricing this job as a contractor?
Homeowners see national ranges on this page. If you are building the estimate, use the same scope assumptions — then price to burdened labor, overhead recovery and a real margin.
We never sell leads. Read the promise.
Find a licensed pro
When you are ready to hire for flooring cost estimator, start with licence verification — not with whoever answered first.
No paid placement
Rankings are never sold. Order reflects verification depth and relevance, not payment.
Verify any licence yourself before signing: state licensing hub.
Common questions
How much does flooring cost per square foot installed?
LVP often $4–$12/sq ft installed; tile and hardwood commonly $10–$22/sq ft depending on metro and prep.
Do quotes include removing old flooring?
Ask explicitly — tear-out and disposal are often $1–$3/sq ft extra.
How much extra for stairs?
Plan roughly one stair tread as 2–3 sq ft of labor-heavy area — each flight adds hundreds in labor.
Is subfloor leveling included?
Sometimes — verify self-leveler or plywood patches are in writing.
LVP vs laminate cost?
Laminate is usually slightly cheaper; LVP handles moisture better on slab.
Should I buy material myself?
Contractors may not warranty customer-supplied product — compare total installed price.
How long does installation take?
Often 1–3 days for single-level whole-home LVP; tile takes longer.
When is tile worth the premium?
Wet areas and high-traffic entries — pair with the tile calculator for quantity.
Is this a quote from a contractor?
No — it is a planning band from published medians and engineering rules. Always collect written, itemized bids.
Can I save my results?
Use Print / save PDF on the shareable card or save to your homeowner account when signed in.
Why does my metro change the number?
Labor and permit costs vary by market. We apply a regional cost index from our metro table.
What vintage are the cost ranges?
2024–2026 residential medians cross-checked with True Trade Path cost guides and RSMeans-style repair data.
Does this include tax?
Unless your quote says otherwise, assume sales tax may apply to materials in your state.
Should I get three quotes?
Yes — three comparable scopes are the standard check before you sign.
What if my house is unusual?
Historic homes, steep sites, and commercial-grade equipment need site-specific quotes — treat this as a screen.
Where is the pro counterpart?
See the counterpart bridge at the bottom — contractors use the paired tool to build defensible pricing.
You may also need
The next decision usually follows directly from this one.
- CalculatorTile & Flooring CalculatorCalculate tile, flooring, underlayment, thinset and grout for a room with waste.
- EstimatorRoom-by-Room Renovation Cost CalculatorEstimate renovation cost for a single room — kitchen, bath, bedroom, basement, or office.
- EstimatorRenovation Cost EstimatorEstimate a kitchen, bath, basement or addition project by scope, finish level and region.
- Cost guideFlooring Installation CostInstalling new flooring — hardwood, LVP, tile, or carpet — in a residential space.
- ChecklistIs My Contractor Quote Too High? — Quote & Contract CheckerPaste or enter contractor quote line items to flag missing scope, exclusions, deposit caps, and vague allowances.