22 LF quartz kitchen
One sink cutout, standard edge.
Often $2,400–$3,500 installed mid-market.
Estimator · Free
Countertop Cost Estimator
Linear feet, material, edge profile, cutouts, and backsplash → installed price band.
Expected in Denver
$1,700–$3,800
Typical $2,600
Shareable summary
Quick answer
Quartz and granite countertops often run about $70–$160 per linear foot installed for a standard edge, with laminate far lower and premium edges or waterfalls higher. Measure your runs, pick a material, and use the estimator for a band before template quotes.
What this assumes
- Pricing is per linear foot of run — corners and waterfalls add fabrication time beyond this estimate.
- Cutouts assume standard sink and one cooktop — odd shapes add templating cost.
- Old countertop removal not included unless noted on quote.
Important
Stone slabs have seam placement and support requirements — template day is after cabinets are set.
Understanding the result
Linear feet versus square feet
Fabricators quote runs along cabinet depth (often 25–26 inches). Measure along the wall for each straight section.
Quartz vs granite
Quartz is engineered and consistent; granite is natural with slab variation. Installed prices often overlap in the mid market.
How the math works
Installed $ = linear feet × material $/LF × regional blend × edge/cutout/backsplash multipliers.
Where to find each input
- Cabinet plan — measure each run
- Slab quote — $/LF from fabricator
- Cutout count — sink and cooktop
- Backsplash LF — if slab or tile
Worked examples
12 LF bath laminate
Post-form laminate.
Lower band — hundreds, not thousands.
30 LF quartz with waterfall
Premium edge toggle on.
Fabrication premium — verify miter waterfall separately.
What this does not include
- Plumbing disconnect
- Old top haul-away
- Cabinet leveling
Regional adjustment
Stone fabrication is regional — remote markets pay travel for template crews.
Accuracy and references
NKBA planning guides; True Trade Path kitchen remodel cost ranges.
Counterpart bridge
Pricing this on the contractor side?
This page interprets quotes and budgets from the buyer’s chair. The matching pro tool uses the same scope logic to build a defensible price.
Open Kitchen Remodel PlannerFor trade owners
Pricing this job as a contractor?
Homeowners see national ranges on this page. If you are building the estimate, use the same scope assumptions — then price to burdened labor, overhead recovery and a real margin.
We never sell leads. Read the promise.
Find a licensed pro
When you are ready to hire for countertop cost estimator, start with licence verification — not with whoever answered first.
No paid placement
Rankings are never sold. Order reflects verification depth and relevance, not payment.
Verify any licence yourself before signing: state licensing hub.
Common questions
How much do quartz countertops cost?
Often $70–$160 per linear foot installed for mid-tier stone — metro and edge detail move the number.
How do I measure linear feet?
Sum straight runs along cabinets; add island faces. Do not multiply by depth for this tool.
What do cutouts cost?
Each sink or cooktop cutout is commonly $150–$400 in fabrication and install labor.
Is backsplash included?
Enter backsplash linear feet separately — tile or slab backsplashes vary widely.
Laminate vs stone?
Laminate post-form is the budget tier; stone and quartz are premium with longer lead times.
When is templating done?
After base cabinets are installed and level — not before.
Do I need plywood subtops?
Full-height stone on cabinets often needs support — confirm with fabricator.
How long from template to install?
Often 1–3 weeks for stone; laminate can be faster.
Is this a quote from a contractor?
No — it is a planning band from published medians and engineering rules. Always collect written, itemized bids.
Can I save my results?
Use Print / save PDF on the shareable card or save to your homeowner account when signed in.
Why does my metro change the number?
Labor and permit costs vary by market. We apply a regional cost index from our metro table.
What vintage are the cost ranges?
2024–2026 residential medians cross-checked with True Trade Path cost guides and RSMeans-style repair data.
Does this include tax?
Unless your quote says otherwise, assume sales tax may apply to materials in your state.
Should I get three quotes?
Yes — three comparable scopes are the standard check before you sign.
What if my house is unusual?
Historic homes, steep sites, and commercial-grade equipment need site-specific quotes — treat this as a screen.
Where is the pro counterpart?
See the counterpart bridge at the bottom — contractors use the paired tool to build defensible pricing.
You may also need
The next decision usually follows directly from this one.
- PlannerKitchen Remodel PlannerLine-item budget, timeline, trades and inspection points for a kitchen project.
- EstimatorCabinet Cost EstimatorLinear feet, stock/semi-custom/custom tier, hardware, and install → price band.
- EstimatorRoom-by-Room Renovation Cost CalculatorEstimate renovation cost for a single room — kitchen, bath, bedroom, basement, or office.
- ChecklistIs My Contractor Quote Too High? — Quote & Contract CheckerPaste or enter contractor quote line items to flag missing scope, exclusions, deposit caps, and vague allowances.